THIS ITEM WILL BE BACKORDERED WITH A FULFILLMENT DATE OF SEVERAL MONTHS. IF YOU WANT TO GET ON THE WAIT LIST, ORDER THE ITEM AND CHOOSE "PAY BY CHECK/CASH" AT CHECKOUT.

Manual Rollsizer suitable for most pistol calibers. The manual rollsizer is a compact rollsizer suitable for processing cases in small batches around 400-500 in one sitting (typically 30-40 minutes). The manual rollsizer should be mounted to your reloading bench for the best results using G clamps or Self Tapping screws through the supplied mounting base.

The crank effort required is minimal but is repetitive. The rollsizer can be connected to your Dillon (TM) case feeder using the supplied hose and adapter clip or connected to other case feeder types with some modifications.

An adapter is included that will allow the use of an electric drill in place of the manual handle.

Machined base plate, adapter shaft, Drop tube mounting bracket, removable, foldable crank handle and 2 x angle iron brackets suitable for mounting / securing to a work bench.

Extra caliber conversion discs and drop tubes are separate and must be ordered separately

Machine only dimensions: 270mm x 250mm x 230mm
4.5kg/10 lbs